Views: 0 Author: Site Editor Publish Time: 2023-06-26 Origin: Site
PVC Pipe Glue has excellent heat resistance, cold resistance, water resistance, oil resistance, corrosion resistance and good mechanical properties. It is convenient and safe to construct, non-toxic and tasteless, and has certain flame retardancy.
Because PVC Pipe Glue raw materials are widely used, cheap, and the production process is mature, the bonding effect is very good, so it is widely used in various daily life and industrial production.
PVC Pipe Glue is often used for the bonding of rigid PVC products, such as chemical, thermoelectric, PVC board bonding in electroplating tanks, PVC wire and cable pipe and bonding of water, steam and oil pipe joints, plastic toy industry, PVC artificial leather, PVC The bonding of tarpaulin raincoats and PVC flooring is also applicable to the cross-bonding of ABS, plexiglass, AS, polystyrene, PBT, PPO, PC and other materials. It is also used for sealing the seams of automobile compartments, body welds and trimming the outer joints of automobile parts. The deep parts of the parts, the gaps between the fan and the air conditioner are sealed, which can play the role of shockproof, anti-corrosion, leakage prevention, noise reduction and pollution prevention. It can also be used as the outer surface of the car floor, and the stone in the left and right wheel covers is resistant to stone.
PVC plastic is a common material in daily life, and it is also the most widely used plastic material that requires glue bonding. The corresponding PVC adhesive is also a wide variety. What kind of PVC Pipe Glue should I choose? What are the relevant precautions?
When it comes to sticky PVC materials, experienced glue manufacturers will let customers mail PVC samples and recommend suitable glue according to the oiliness of PVC surface. Only in this way can we give the most accurate glue sample in one step, avoiding the glue sample to the customer, and the effect is worse, and it is necessary to repeat the sample and other unnecessary troubles. Also, the PVC material is soft and hard, so there is a corresponding glue. Soft PVC Pipe Glue does not necessarily work well with hard PVC, and vice versa.
In addition, according to the requirements of different customers, the color of the glue, the fast drying speed, and the operation method will become important reference conditions for selecting glue. For transparent PVC materials, colorless and transparent glue is the first choice. After all, colored glue will make the bonding surface abnormally unsightly, and there must be no whitening after the glue is dry. After the glue is dry, whitening is a common problem of many transparent PVC Pipe Glue. . The second is that the operation is convenient, small area stereotypes, it is definitely the best to dry quickly, if the large area is compounded, the glue must not be too fast, otherwise it will not be glued, and the effect will not be reflected.
Because these restrictions are many, when choosing PVC Pipe Glue, be sure to list all the requirements, in order to find a product that suits you, avoiding the time and money loss caused by blindly searching for glue.
ERA covers almost all series of glue for plastic piping system. We have 30 types of glue, including PVC glue, CPVC glue, ABS glue, cleaner and primer, can connect pipes up to 750mm.
A. Products Scale:
ERA covers almost all series of glue for plastic piping system. We have 30 types of glue, including PVC glue, CPVC glue, ABS glue, cleaner and primer.
B. Production Scale:
For glue production, totally we have more than 30 advanced production and filling lines which are environmental-friendly, safe, efficiently and high quality.
C. Raw material:
ERA uses High-quality raw material abroad. All the raw materials shall be inspected before production.
D. Technology:
ERA glue has a strong R&D team and complete testing equipment. The stable formula, technology and standardized production process will ensure high quality and efficiency.
E. Quality control:
We strictly implement the ASTM standards, from raw material storage inspection, production process quality inspection, to finished product inspection and packaging inspection.
F. Packaging:
ERA cans and cartons meet the international hazardous chemical packaging requirements. And ERA can offer customized packaging, such as tray packaging.
G. Certificate:
our glue complies with NSF/ANSI 14 and NSF/ANSI 61 and all applicable requirements. Full sets of NSF certificates and test reports are all available.
H. Service:
All customers can enjoy our VIP service with the help from the whole team of customer manager, regional manager, sales director, technical team and production team.
Also, ERA annually invests 1.5 million dollars to develop new products, so as to follow the market trends, and develop the best-selling new products in various markets all over the world to help our customers expand their product lines and seize the market opportunities.
ERA fully supports the customers’ advertising work, and works with our product agent, regional agent and exclusive agent to promote and display the image of ERA brand in local market together through many ways. We can customize the advertising program according to the market situation, and provide advertising materials such as lintel, light box, car advertisement, radio, newspaper, display board, etc. and build ERA brand together with our customers.
In order to having a firmly bonded piping line and avoiding the leakage, we need to know and apply standardized connection steps.
Here are the steps of pipe connection:
Step 1: Cut square, de-burr, level 15°
Step 2: Mark gluing boundary
Step 3: Apply primer in fitting socket
Step 4: Apply full even layer of cement on pipe
Step 5: Apply full even layer of cement on pipe
Step 6: Apply thin even layer of cement in fitting socket
Step 7: Push pipe to fitting socket bottom w/1/4 turn twist
Step 8: Hold the joint for 30sec
Step 9: Remove excess cement from pipe & fitting
Title: Mastering the Art of PVC Pipe Fittings: A Comprehensive Guide on Proper Gluing Techniques
Introduction:
Polyvinyl chloride (PVC) pipe fittings are widely used in plumbing, irrigation, and various other applications due to their durability, versatility, and ease of installation. Connecting PVC pipe fittings with glue is a common and effective method, ensuring a secure and watertight seal. In this comprehensive guide, we will delve into the step-by-step process of connecting PVC pipe fittings using glue, covering everything from preparation to troubleshooting common issues.
1. Understanding PVC Pipe and Fittings:
Before diving into the gluing process, it's essential to have a basic understanding of PVC pipes and fittings. PVC is a thermoplastic material known for its strength, chemical resistance, and affordability. PVC fittings come in various shapes and sizes, including elbows, tees, couplings, and more. Properly connecting these fittings is crucial to achieving a leak-free system.
2. Gather the Necessary Materials:
To begin the gluing process, gather the necessary materials. This includes PVC pipe fittings, PVC pipes, PVC primer, PVC cement or glue, a clean rag, a saw or pipe cutter, and a pencil or marker for marking measurements. Ensure that you are using the correct type of glue specifically designed for PVC applications.
3. Safety Precautions:
Before starting the gluing process, prioritize safety. Wear safety goggles to protect your eyes, and work in a well-ventilated area to avoid inhaling fumes from the PVC primer and glue. Additionally, consider using gloves to protect your hands during the process.
4. Preparation:
Proper preparation is key to a successful PVC pipe fitting connection. Start by measuring and marking the pipe according to your specific requirements. Use a saw or pipe cutter to make clean, straight cuts. It's crucial to ensure that the pipe ends are smooth and free from any burrs or debris that could compromise the integrity of the connection.
5. Dry Fitting:
Before applying glue, perform a dry fitting to check the alignment and fit of the PVC pipe and fittings. This step allows you to identify any issues and make adjustments before the glue is applied. Dry fitting is particularly important when working with complex systems or intricate layouts.
6. Applying Primer:
Once the dry fitting is successful, move on to the priming process. Apply a generous coat of PVC primer to the outside of the pipe end and the inside of the fitting socket. The primer helps clean and prepare the surfaces for better adhesion of the glue, promoting a stronger bond.
7. Applying PVC Glue:
After priming, it's time to apply the PVC glue. Use a brush or applicator that comes with the glue to coat the primed surfaces evenly. Be swift in your application, as PVC glue tends to dry quickly. Ensure that the entire primed area is covered, and avoid excess glue that could create a messy joint.
8. Joining the Pipes:
With the primer and glue applied, swiftly join the PVC pipe and fitting. Make sure to twist the pipe slightly as it is inserted into the fitting socket. This twisting motion ensures an even distribution of the glue and facilitates a strong, uniform connection. Hold the joint firmly for a few seconds to allow the glue to set.
9. Wiping Excess Glue:
Immediately after joining the pipes, use a clean rag to wipe away any excess glue around the joint. A neat and tidy finish not only enhances the aesthetics but also ensures that excess glue does not interfere with the performance of the connection.
10. Allowing Cure Time:
Curing time is crucial for the glue to set and create a strong bond. Follow the manufacturer's recommendations for the specific PVC glue used, as curing times can vary. Avoid putting stress on the joint during this period to prevent potential issues.
11. Testing the Connection:
Once the glue has fully cured, perform a pressure test to ensure the integrity of the connection. Run water through the system and inspect for any signs of leaks. This step is essential for confirming the success of the gluing process and identifying any potential issues before the system is put into regular use.
12. Troubleshooting Common Issues:
Even with careful execution, issues may arise. Common problems include leaks, incomplete bonding, or misalignments. This section of the guide explores troubleshooting techniques to address these issues, ensuring a reliable and robust PVC pipe fitting connection.
13. Conclusion:
In conclusion, connecting PVC pipe fittings with glue is a fundamental skill for anyone working with PVC plumbing systems. By following the step-by-step guide outlined above, you can master the art of gluing PVC pipes and fittings, ensuring a secure and durable connection. Whether you're a DIY enthusiast or a professional plumber, proper gluing techniques are essential for creating leak-free and efficient PVC systems.
In order to having a firmly bonded piping line and avoiding the leakage, we need to know and apply standardized connection steps.
Features
★PVC glue product is a new type of single-component fully transparent solution glue. It is a special fully transparent PVC plastic glue product specially developed to remove difficult-to-stick transparent or white PVC plastic products. It can be used in plastics and plastics, plastics and metals, plastics and Non-metallic mutual bonding or cross-bonding problems.
★ It has many advantages such as room temperature curing, easy operation, high bonding strength, rapid positioning, high elasticity, soft film, and non-toxic cured product;
★ It has excellent properties such as water resistance, heat resistance, acid resistance, alkali resistance, corrosion resistance, oil resistance and no whitening.
★ Widely used, it can be used for mutual bonding and cross-bonding of PVC, PE, PP, ABS, PS, PMMA, nylon, sponge, film, metal, non-metal and other materials.
Product Usage
The product has a wide range of uses and can remove various difficult-to-stick transparent or white plastic products such as: polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), ABS, PMMA, nylon, sponge, film, foam plastics etc.; also has good bonding strength to metal and non-metal materials, such as plexiglass, bamboo, wood, rubber, metal, fabric, paper; especially for mutual adhesion and cross-bonding of plastics and metal and non-metal materials. It has super bonding strength; it is suitable for home appliance industry and radio industry.
★Appearance: completely transparent viscous liquid
★ Viscosity (room temperature 25℃): 5×10－5×10mpa.s
★ Peel strength: N/cm canvas/canvas>40;
★ Shear resistance: PVC/PVC＞40; PE film/PE film＞8; Rubber＞25; Metal/sponge, foam, tear.
★ After immersion in water: there is basically no change in strength: solid content 40-50%
Instructions
★ Clean the oil, dirt and other dirt on the surface of the adherend and keep it clean and dry;
★ Directly apply the glue evenly on the surface of the two adherends, wait for 5 to 10 minutes, and when the adhesive film is slightly non-sticky and dry to the touch, align the two adherends and apply a little pressure. The adhesive surface is more closely adhered, and it can be left for 1-2 hours. The use effect will be achieved in 24 hours, and the optimal bonding strength will be achieved in 48 hours;
★ Warm reminder: If you need to improve the bonding strength and temperature resistance, you can pre-coat the surface of the material with a treatment agent, then add about 5-8% curing agent to the glue and stir thoroughly to improve the bonding strength and temperature resistance. The adhesiveness is obviously improved. If it is heat activated at 60-75℃ for 4-7 minutes, the re-adhesive effect will be better. The glue added with curing agent must be used up within 12 hours.
Precautions
★ This type of product is flammable, and storage and transportation must be handled in accordance with the regulations for flammable products;
★ Be ventilated when using, pay attention to safety, and operate away from fire sources;
★ After use, cover the container tightly to prevent the colloid from solidifying. If the glue is too thick, an appropriate amount of toluene or halogen can be used instead of diluting.
★ Double-sided gluing is more effective than single-sided gluing.
★ Do not move the bonding surface easily, otherwise air will enter and affect the strength.
★ Over time, there may be some corrosion on the metal container, making the adhesive look darker, but it does not affect product performance.
★ This product should be sealed and stored in a cool place. The storage period is 1 year. When using the remaining glue from storage, please use a small amount first to see if it is qualified, and then use it in large quantities.
★ Beware of inhalation and ingestion, and keep out of reach of children!
