How to Install Sanitary Pipe？

      As for the Sanitary pipe of the bathroom, We believe that 

      everyone is familiar with it in daily life and often sees it. Drains 

      are an essential part of the proper functioning of bathroom facilities, 

      just as blood vessels are to our bodies. Without the drain pipe in the 

      bathroom,it will be difficult to function normally, The whole bathroom 

      won't work. So how to install the toilet drain pipe? What aspects 

      should be paid attention to during the installation process? This 

      article introduces the general operating specifications for the 

      installation of toilet drain pipes.

Methods/Steps:

1. The decoration of the bathroom is generally consistent with our other rooms,but due to its special function, we need to strengthen it in some aspects. The special function of the bathroom endows it with high requirements for waterproof, anti-odor, ventilation and anti-slip. And these requirements are what we need to focus on when installing toilet drains. Generally, we use the following means to ensure that the installation of toilet drainage pipes can meet the requirements.

        2. First, the material aspect. PVC pipes are generally used for 

      drainage pipes,and double-walled hollow or spiral noise-reducing 

      pipes are best used for high-rise drainage pipes; and the best 

      materials must be used for adhesives and water pipe concealment 

      projects. It must be odor-free and leak-proof, and it is best to 

      have flame-retardant properties.

3. The drainage horizontal pipe should have a slope, generally not less than 1%. When installing the drainage pipe, pay attention to the drainage slope to facilitate the timely discharge of sewage.

4. The second is that if a drainage horizontal pipe has more than 

one sanitary appliance, it is necessary to increase the cleaning port (inspection port). The inspection port is generally one meter above the ground, and the center of the H pipe is about 1.5meters. Inspection 

ports are provided for inspection and quick troubleshooting.

        5. In addition, if the length of the PVC standpipe is more than 4 

      meters, an expansion joint is required. Each floor of the commercial 

      building needs to have an expansion joint.

         6. At the same time, if the sanitary ware itself does not have a 

      trap, an S-type or P-type trap must be installed on the pipe to prevent 

      the odor from overflowing from the pipe and ensure that the air in the 

      bathroom is fresh.

7. In addition, high-rise risers should be equipped with fire-resistant rings, and the installed pipes should be kept away from fire sources to avoid accidents.

8. Finally, even for the bathroom, it is necessary to properly consider the aesthetics when decorating, and make a reasonable layout plan before decorating.

            ERA produced UPVC Rain Water pipe, Drainage Pipe

             Product Advantages:

              1. Excellent performance and long service life

              UPVC pipe fittings have excellent physical properties, corrosion

      resistance, strong impact resistance, small fluid resistance, 30% 

      higher flow rate than cast iron pipes of the same diameter, aging

      resistance, long service life, and the service life can reach 50 years.

2. Full range

There are many accessories and accessories, which can meet various design and installation requirements.

3. Convenient construction

The products are complete, the connection design is reasonable, easy to install and maintain, and fully meet various design and construction requirements.

4. Comprehensive cost-effective

Save construction costs, the overall cost of using UPVC pipes and fittings is lower than that of cast iron pipe systems of the same specification.